high power, 5 channel transmit combiner for amps/gsm/is-95 800 - 960 mhz pd60-0004-05s v1.00 m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 3 3263 8671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 3 3263 8769 fax +44 (1344) 300 020 1 the preliminary speci?ations data sheet contains typical electrical speci?ations which may change prior to final introduction. l l l l l l features low loss high power handling integral heat sink high isolation low vswr low cost description m/a-com? pd60-0004-05s is designed to provide a low loss method of combining signals from ?e ampli?rs or transmitters in a number of cellular bands. high power internal components and an integral heat sink enables the device to combine non-coherant 50 watt signals. microstrip construction offers a design that is cost effec- tive and highly repeatable. *above 7.78db theoretical combining loss the required method of cooling is forced air at 50 cfm at +60? max ambient for five 50 watt simultaneous inputs. if the power level or ambient temperature is low- ered, the forced air requirement can be reduced. this device can be provided with type n connectors or different power handling capability. m/a-com also offers a wide selection of cost effective devices for combining and dividing any number of channels in popular cellular transmit and receive bands. please consult our factory.
sma jack
(6 pls) j6 j5 j4 j3 j2 j1 thru 2.75 (69.9) .38 (9.5) .75 (19.1) 6.00 (152.4) .15 (3.8) 5.50 (139.7) .15 (3.8) 5.70 (144.8) 5.20 (132.1) 2.00 (50.8) nom 1.00 (25.4) typ .16 (4.0) 4x' preliminary speci?ations parameter limit typical impedance 50 ohms nom vswr 1.40:1 max 1.20:1 insertion loss* 0.6db max 0.4db amplitude balance 0.25db max 0.12db isolation 20db min 26db max input power 50 watts/input operating temp -40 to +60? performance speci?ations: 800-960 mhz (dimensions in parenthesis are in mm)
|
